XOANONS®LD 1143B
XOANONS® Viscosity reducer agent
Used for preparing carbon nanotube slurry with dispersion and viscosity-reduction
Model number
XOANONS®LD 1143B
Specification
|
Item |
Metric |
Test the method or the equipment |
Criterion of detection |
|
Composite |
Amine compounds |
--- |
--- |
|
Appearance |
Colorless to slightly yellow clear liquid |
--- |
--- |
|
Active content |
100 % |
--- |
--- |
|
Density |
1.06-1.10 g/ml |
Specific gravity cup |
GB/T 6750-2007 |
|
Dynamic viscosity |
100-1000 mPa.s |
Digital rotary viscometer |
GB/T 15357-2014 |
|
Refractive index |
1.467-1.472 |
Abbe refractometer |
GB/T 6488-2008 |
Note: This data sheet is intended to give typical results, not standard. Subject to COA.
Application system
Dispersion and viscosity reduction for carbon nanotube slurry
Property
Paired with PVP dispersed carbon nanotube slurry, it has excellent wetting and viscosity reduction effect;
The dispersed carbon tube slurry has good fluidity and low thixotropy.
Incorporation
Add the dispersant XOANONS®LD 1143B and PVP (recommended to mix XOANONS®LD 1143B: PVP = 1:2-1:4 ratio) to the NMP or water, stir well and dissolve. Then add it to the slurry according to the formula and grind and disperse it together. The suitability of the dispersant system can be determined based on the particle size and viscosity of the slurry.
Suggest addition
Addition amount to carbon nanotube: 10-50%
Storage stability
Keep intact 24 months in original package. Products beyond the storage period may continue to be used after inspection. The container must be closed immediately after use.
Package
25KG (plastic drum)