XOANONS®Adhesive
For the preparation of temporary ceramic binders and molding agents

Product Code
XOANONS®LD 4112-50W

Physicochemical Index

Item	Specification	Test Method/Equipment	Test Standard
Composition	Polymer dispersion	---	---
Appearance	Milky white liquid	---	---
Active content	50%	Electric hot blast drying oven (120℃×1h)	GB/T 1725-2007
Density	1.05-1.09 g/ml	Pycnometer	GB/T 6750-2007
Viscosity	5-50 S	Ford Cup #4	GB/T 1723-1993
pH	7.0-7.5	Glass electrode method	GB/T 9724-2007

Note: These indexes represent typical results only and are not regarded as specifications. The actual Certificate of Analysis (COA) shall prevail.

Application Field
For ceramic slurries

Key Feature
Acts as a temporary binder and molding agent for ceramic slurries, improving press-forming performance and increasing the flexural strength after drying.
Compatible with slurries under normal conditions; to be added to the slurry prior to spray drying.

Usage Method
Add during the slurry mixing process and before spray drying.

Recommended Dosage
Addition amount (as purchased), based on dry powder: 0.5-4.0%

Storage Stability
Seal tightly and store in a dark and dry place. Protect from frost and excessive heat. When stored under proper conditions (2–30℃) in the original unopened packaging, the product has a shelf life of 12 months. Products beyond the shelf life may still be used if passing re-inspection. Ensure the container is tightly resealed immediately after each use until it is completely empty.

Package
25 kg (plastic barrel)