Anhui Xoanons Chemical Co.,Ltd.

Anhui Xoanons Chemical Co., Ltd.

PRODUCTS

Additives and functional resins for coatings and inks

Anti-graffiti additive&resin
XOANONS®Anti-graffiti additive
JIAZHI®Anti-graffiti resin
Surfactant additive
XOANONS®Polyacrylate leveling agent
XOANONS®Silicon modified polyacrylate leveling agent
XOANONS®Polyether modified silicon leveling agent
XOANONS®Polyester modified silicon leveling agent
XOANONS®Acrylic reactive silicon additive
XOANONS®Substrate wetting agent
Dispersing agent
XOANONS®Dispersing agents for paints&ink
Dispersants for nano organic and inorganic pigments
XOANONS®Dispersing agent for conductive carbon black
XOANONS®Dispersing agent for nano metal powders
XOANONS®Dispersing agent for graphene
XOANONS®Dispersing agent for leather colorants
Defoamer
Hydroxyl functional group reactive silicon oil
Acrylate based reactive silicon oil

Additives for new energy applications

Additives for new energy applications
Dispersant for single-walled carbon nanotube slurry
Dispersant for graphene and few-walled carbon nanotubes
Dispersant for multi-walled carbon nanotubes
Viscosity reducer for carbon nanotube slurry
Conductive carbon black dispersant
Dispersant for LFP and LMFP battery cell slurry
Dispersant for edge-insulating ceramic coating slurry for cathode materials
Additive for improving wettability of separator and anode slurry
Lipophilic ceramic dispersant for separator coating
Carbon nanotube dispersant for battery foil coating
Dispersant for water-based LFP battery cell slurry
Anti-bleeding agent for LFP and boehmite slurry
Dispersant for water-based PVDF
Defoamer for water-based separator slurry
Carbon coating dispersant for LFP precursor prepared by red iron oxide method

Additives for semiconductor use

Additives for semiconductor use
Dispersant for nano-powder coating
Recommendation of dispersants for aqueous systems
Solvent-based dispersant
Water-based adhesive
Water-based defoamer

PRODUCTS

JIAZHI®JZ-9540-20

JIAZHI® easy-cleaning functional resin

Model number
JIAZHI®JZ-9540-20

Specification
Composition: Silicone modified hydroxyl acrylic resin solution
Appearance: Transparent to slight yellowish liquid
Solvent: BAC/PMA
Content : 50±3%(140℃ 2h)
Viscosity: 100-1000mPa·s (Rotating viscometer)(25±0.2)℃
Hydroxyl value: 170±5 mg KOH/g (Theoretical value of solid resin)
Note: This datasheet is intended to give typical results, not standard.Subject to COA.

Application system
Solvent-based system

Properties
●Increase slip. Improve hydrophobicity and oleophobicity.
●Provide anti-marker wiping performance.
●Provide lotus effect.
●Excellent flexibility.
●Excellent hot self-healing and room temperature healing.
●Water contact angle>100°
●Excellent weather resistance.

Storage stability
Store in a cool, dry place in the unopened original packaging for 36 months. Products that exceed the storage period can continue to be used after passing the inspection. It must be closed immediately after use.

Recommended formula
1. Suggestion for PU varnish formulation

Material

Dosage%

Part A

 

 

 

 

JZ-9540-20

76

PMA

22.75

Dryer(1%)

1

WE-D8920CR(leveling agent)

0.25

Total

100

Part B

N3390

19.4

Remark:
1.1 NCO% of N3390=19.6, produced by Covestro, Germany.
1.2 After mixing A and B components, the storage period is 5-7 hours under the condition of a lid. Therefore, mixed materials should be used as soon as possible, otherwise it will be gelatinized and cannot be used.
1.3 Recommended baking temperature:
Paint protection film coatings: After baking at 100-130°C for 2-3 minutes, cool and rewind, and continue to mature at 60-80°C. The higher the temperature and the longer the time, the better the effect.
Note: The effect of stain resistance and chemical resistance depends on whether the coating is fully cross-linked; it is an effective way to put the surface-treated film in curing box for mature. At least 24 hours, if it can reach more than 48 hours, the effect will be better.
Other Industrial coatings: 80°C for 1 hour or 150°C for 5 minutes.

Package
25KG / 180KG

Go
Top