Additives and functional resins for coatings and inks
New energy, semiconductor additives
JIAZHI® easy-cleaning functional resin
Model number
JIAZHI®JZ-1021
Specification
Composition: Silicon modified hydroxyl acrylic resin solution
Appearance: Yellowish translucent liquid with no mechanical impurities
Solvent: IPA/diethylene glycol butyl ether/water
Content: 54±2%(120℃ 1h)
Density: 1.01-1.05g/ml(25±1)℃
Viscosity: 800-3000mPa·s(Rotating viscometer)(25±0.2)℃
Hydroxyl value: 78±5 mg KOH/g(Theoretical value of solid resin)
Note: This datasheet is intended to give typical results, not standard. Subject to COA.
Application system
Water-based system
Properties
● Increase slip. Improve hydrophobicity and oleophobicity.
● Provide anti-marker wiping performance.
●Compared with anti-graffiti additives, it has better anti-painting effects, and performs better in resistance to alcohol wiping and methyl ethyl ketone wiping. Under the condition of baking at 210 °C for 90 seconds, it can withstand more than 100 times of marker pen wiping, over 300 times of alcohol wiping, and reach 120 - 130 times of methyl ethyl ketone wiping.
● Provide oil and dirt resistant and easy to clean on the metal surface.
● When added as an additive more than 2%, it has an anti-fingerprint effect.
● Provide lotus effect.
● This resin is not infinitely miscible with water. It is recommended that the amount of water be lower than 40% of the amount of resin. Excessive water may affect the transparency of the varnish.
Recommended formula
|
|
Material |
Dosage% |
|
Part A
|
Water soluble acrylic resin |
61.25 |
|
JIAZHI®JZ-1021 |
3.75 |
|
|
Ethylene glycol butyl ether |
5 |
|
|
Water |
18.6 |
|
|
Substrate wetting agent |
0.2 |
|
|
Leveling agent |
0.5 |
|
|
Defoamer |
0.2 |
|
|
Part B
|
Water based amino resin |
10 |
|
Water based acid catalyst |
0.5 |
|
|
|
Total |
100 |
Note: after mixing A and B components, mixed materials should be used in 8 hours.
Bake at 150 ℃ for 30 min or 210℃ for 90 s. If there is a higher requirement for anti-fouling and solvent-resistant wiping, it can increase the baking temperature or prolong the baking time.
Storage stability
This product should be placed in a dark, cool and dry place. The storage temperature should be 5-35 °C, and the package should be kept intact. The shelf life of this product is 12 months. It can be used after performance evaluation after more than 12 months. This product needs to be strictly protected from frost. After opening the package, it is recommended to use it all at once.
Package
25KG / 180KG
Go
Top