Anhui Xoanons Chemical Co.,Ltd.

Anhui Xoanons Chemical Co., Ltd.

PRODUCTS

XOANONS®Additive

Surfactant
Polyacrylate leveling agent
Fluorocarbon modified polyacrylate leveling agent
Fluorine surfactant
Polyether modified silicon leveling agent
Reactive silicon additive with acrylic functional group
Substrate wetting agent
Anti-graffiti additive
Performance enhancer
Dispersant
Defoamer

JIAZHI® Easy-cleaning functional resin

Anti-graffiti and Anti-adhesive Resin for municipal engineering paint
Anti-pollution and rain-resistant resin for protective film of paint
Easy-cleaning resin for industrial paint
Anti-icing resin
Anti-graffiti resin for automotive leather and sofa leather
Anhui Xoanons Chemical Co.,Ltd.

PRODUCTS

JIAZHI® JZ-9510

Model number

JIAZHI®JZ-9510

Specification

Composition     

Silicon modified hydroxyl acrylic resin solution

Appearance     

Slight yellowish to yellowish liquid

Solvent           

BAC/ PMA

Content

50±3%(140℃ 2h)

Density        

0.99-1.03g/ml(25±1)℃

Viscosity       

1000-6000mPa·s
(Rotating viscometer)(25±0.2)℃

Hydroxyl value

120±5 mg KOH/g (Theoretical value of solid resin)

Note: This datasheet is intended to give typical results, not standard.Subject to COA.

Application system

Solvent-based

Properties

Increase slip. Improve hydrophobicity and oleophobicity.

Provide anti-marker wiping performance.

Provide lotus.

Excellent compatibility.

Compared with anti-graffiti additive, better anti-graffiti effect and solvent-resistant wiping performance.

Water contact angle >100°
Storage stability

Store in a cool, dry place in the unopened original packaging for 36 months. Products that exceed the storage period can continue to be used after passing the inspection. It must be closed immediately after use.

Recommended formula

1. Suggestion for PU varnish formulation

 

Material

Dosage%

Part A

JZ-9510

76.0

PMA

22.65-22.74

Dryer(1%)

1.0

WE-D8920BR(leveling agent)

0.25

WE-D980(defoamer)

0.01-0.1

Total

100

Part B

N3390

18

Note: 1.Usage recommendation for defoamerAdd WE-D980 with 0.01% to PU varnish and no affecting of compatibility. Can increase the addition to 0.1% of WE-D980 to color paint.
2.NCO% of N3390=19.6, produced by Covestro, Germany.
3.The mixed part A and B should be used up within 5-7 hours in a sealed container. Otherwise, the mixed material will be gelled.
4.Suggest dry it at 80℃ for 1h or 150℃ for 5min.

2. Suggestion for baking formulation

Product name

Dosage%

JZ-9510

50

Butylenized amino resin

10

Solvent

38.5

Adhesion promoter

1

Acid catalyst

0.5

Ttotal

100

Note:Amino resin in this formulation is Sanmu582, and its addition should be adjusted to specific requirements. Suggest dry it at 150℃ for 30min or 210℃ for 90s.
Package
25KG / 180KG

Go
Top