Anhui Xoanons Chemical Co.,Ltd.

Anhui Xoanons Chemical Co., Ltd.

PRODUCTS

XOANONS®Additive

Surfactant
Polyacrylate leveling agent
Fluorocarbon modified polyacrylate leveling agent
Fluorine surfactant
Polyether modified silicon leveling agent
Reactive silicon additive with acrylic functional group
Substrate wetting agent
Anti-graffiti additive
Performance enhancer
Dispersant
Defoamer

JIAZHI® Easy-cleaning functional resin

Anti-graffiti and Anti-adhesive Resin for municipal engineering paint
Anti-pollution and rain-resistant resin for protective film of paint
Easy-cleaning resin for industrial paint
Anti-icing resin
Anti-graffiti resin for automotive leather and sofa leather
Anhui Xoanons Chemical Co.,Ltd.

PRODUCTS

JIAZHI® JZ-9545

Model number

JIAZHI®JZ-9545

Specification

Composition     

Silicon modified hydroxyl acrylic resin solution

Appearance      

Slight yellowish to yellowish liquid

Solvent            

BAC/ PMA/ Xylene

Content

50±3%(140℃ 2h)

Density         

1.02-1.06g/ml(25±1)℃

Viscosity        

6000-16000mPa·s
(Rotating viscometer)(25±0.2)℃

Hydroxyl value

76±5 mg KOH/g
(Theoretical value of solid resin)


Note: This datasheet is intended to give typical results, not standard.Subject to COA.

Application system

Solvent-based

Properties

Increase slip. Improve hydrophobicity and oleophobicity.

Provide anti-marker wiping performance.

Provide lotus.

Compared with anti-graffiti additive, better anti-graffiti effect and solvent-resistant wiping performance.

Water contact angle >100°

Excellent anti-graffiti performance in light color paint.

Good anti-graffiti performance under lower-temperature curing condition.

Storage stability

Store in a cool, dry place in the unopened original packaging for 36 months. Products that exceed the storage period can continue to be used after passing the inspection. It must be closed immediately after use.

Recommended formula
1. Suggestion for PU varnish formulation 

 

Material

Dosage%

Part A

JZ-9545

76.0

PMA

22.65-22.74

Dryer(1%)

1.0

WE-D8920BR(leveling agent)

0.25

WE-D980(defoamer)

0.01-0.1

Total

100

Part B

N3390

23

Note:

1.Usage recommendation for defoamer Add WE-D980 with 0.01% to PU varnish and no affecting of compatibility. Can increase the addition to 0.1% of WE-D980 to color paint.
2.NCO% of N3390=19.6, produced by Covestro, Germany.
3.The mixed part A and B should be used up within 5-7 hours in a sealed container. Otherwise, the mixed material will be gelled.
4.Suggest dry it at 80℃ for 1h or 150℃ for 5min.

2. Suggestion for baking formulation 

Product name

Dosage%

JZ-9545

50

Butylenized amino resin

10

Solvent

38.5

Adhesion promoter

1

Acid catalyst

0.5

Ttotal

100


Note:Amino resin in this formulation is Sanmu582, and its addition should be adjusted to specific requirements.
Suggest dry it at 150℃ for 30min or 210℃ for 90s.  

Package
25KG / 180KG

 

Go
Top