Anhui Xoanons Chemical Co.,Ltd.

Anhui Xoanons Chemical Co., Ltd.

PRODUCTS

Silicon leveling agnet
Polyether modified silicon leveling agent
Polyester modified silicon leveling agent
Reactive silicon leveling agent
Anti-graffiti silicon leveling agent
Touch silicon leveling agent
Other
Silicon free leveling agent
Polyacrylate leveling agent
Fluorocarbon modified polyacrylate leveling agent
Fluorine surfactant
Substrate wetting agent
Dispersing agent
Defoamer
Silicon defoamer
Silicon-free defoamer
Adhesion additive
anti-graffiti and easy-cleaning additive
Other
Waterborne resins and emulsions
Silion defoamer
JIAZHI®Resin
JIAZHI® Anti-icing hydrophobic resin
JIAZHI® Anti-graffiti resin
Anhui Xoanons Chemical Co.,Ltd.

PRODUCTS

JIAZHI®JZ-1021

Model number

JIAZHI®JZ-1021

Speccification

Composition      Silicone modified hydroxyl acrylic resin solution
Appearance       Transparent to slight yellowish clear liquid
Solvent             IPA/ diethylene glycol
Content         52±2%(120℃ 1h)
Density      1.01-1.05g/ml(25±1)℃
Viscosity 800-3000mPa·s
(Rotating viscometer)(25±0.2)℃
Hydroxyl value        78±5 mg KOH/g
(Theoretical value of solid resin)

Note: This datasheet is intended to give typical results, not standard.Subject to COA.

Application system

Water-based

Properties

● Increase slip, improve hydrophobic and oleophobic
● Provide wipe-resistance from mark pen, and lotus effect.

● Provide lotus effect.

● Compared with anti-graffiti additives, it has better anti-graffiti, alcohol-resistant and butanone resistant property. After baking 90s at 210 ℃, the resistance to mark pen wipe more than 100 times, resistant to alcohol wipe more than 300 times, resistant butanone wipe to 120-130 times.

● Applicable to anti-oil-and-fouling clean treatment in metal surface.

Recommended formula

Top varnish

  Material Dosage%
Part A Water soluble acrylic resin 61.25
JIAZHI®JZ-1021 3.75
Diethylene glycol monobutyl ether 5.00
Water 18.60
Wetting agent(XOANONS®WE-D547) 0.20
Leveling agent(XOANONS®WE-D881R) 0.50
Defoamer(XOANONS®WE-D9904BR) 0.20
Part B Aqueous amino resin 10.00
Aqueous acid catalyst 0.50
  Total 100.00

Note:
The part A and B should be mixted before usage and used up within 8 hours.

Construction conditions

Baking 30min at 150 ℃ or baking 90s at 210 ℃. If higher requirements of anti-fouling and solvent-resistant wiping, should increase baking temperature or extend the baking time.

Storage stability

Storage: Should store in cool and dry place. Storage temperature should be 5-35 ℃, keep the packaging integrity. Shelf life is 12 months. If over 12 months, it still can be used after pass the performance assessment. This product should be strictly protected from frost. One-time run out once open the package.

package

25KG / 180KG

Go
Top